Registered Eric Greenwell Posted December 13, 2014 Registered Report Share Posted December 13, 2014 Rotax a has new bulletin (SB-912-066UL / 914-047UL) for the "Change of measurement method from cylinder head temperature to coolant temperature for ROTAX® Engine Type 912 and 914 (Series)". This bulletin covers engines with the "new" cylinder heads; basically, the "red line" label for your CHT temperature gauge must be changed to 120 deg C. It was 150 deg C for my engine, so this is a big change. The reason is the new heads have their CHT sensor in a different location, leading to different temperature readings (compared to readings in the old location) under identical circumstances.The only issue I see is for engines (with the new heads) that have had CHTs between 120 deg C and the old 150 deg C limit: should the owner do anything in addition to the gauge change? The SB is silent on that.I got the SB in an email from rotax-owner.com, and you can get the SB from that website. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.