Andy Posted November 20, 2024 Report Posted November 20, 2024 I have a problem with the carb heat on a 109B. When it is pulled to hot it creeps back to cold over the course of 30 secs or so. Has anyone else experienced this issue? What solutions have been found? Quote
El_Guapo Posted December 1, 2024 Report Posted December 1, 2024 Might try folded spring steel flat stock. Long side on pilot side, short side close to the panel. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.