Jump to content
Touring Motor Gliders Association (TMGA)

Recommended Posts

Posted

The turnaround time is generally 4-8 weeks.  We do have loaner canopies available that we can send you to use while yours is out for service.

 Instructions for sending the canopy to us are attached.

 Current repack/recertification cost is $1,775 and replacement rocket is $1,280.

Please let us know if you have any additional questions or need any additional information. 

Dennis 

Aerolite 103, LLC

Magnum Parachutes, LLC

U-FLY-IT Light Sport Aircraft, LLC

 386-738-4444 (Hangar)

740-407-4491 (Cell / Text)

Instructions for Shipping Your Magnum Canopy to us for Repack.
DO NOT ship the rocket to us with your canopy. All expired rockets are returned to us AFTER you receive your replacement rocket, as the expired rockets must be returned to us in the specialized and DOT approved shipping container.
This document contains THREE pages. Please read them all.
Softpack Systems:
1. Disconnect the rocket assembly from the canopy pack at the small carabineer joining the stainless cables (see photo on Page 2).
2. Disconnect the aircraft bridle(s) from the canopy pack at the large carabineer (see photo on page 2).
Complete the Repack Information Sheet (see Page 3), and send it along with the canopy pack to us at the following address. DO NOT ship the rocket, bridles, carabineers, or any other components.
Magnum Parachutes, LLC
915 Biscayne Blvd.
Hangar B
DeLand, FL 32724
(386) 738-4444

Please also email us photos showing:
1. The data info on the canopy pack, clearly showing the serial number of the unit, and the date of manufacture. (See photo on Page 2, circled in red).
2. The serial number stamped into the end of the rocket motor. (See photo on Page 2, circled in red).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...