Jump to content
Touring Motor Gliders Association (TMGA)
  • Carb Altitude Mixture Compensation Setting


    Ethan Graham

    Subject: Carb altitude mixture compensation setting
    From: "prg55100"
    Date: 4/19/08 10:24 AM
    To: G109_Pilots@yahoogroups.com

    Dear all,
    I placed some pictures in the photo album explaining how I proceed to
    set the carb altitude mixture compensation cylinders.
    The cylinder has to be dismounted. It has a large needle on the
    bottom. The needle shall be located a little proud with the cylinder
    bottom side. If the needle is under flush than the mixture is rich.
    The mixture is poor when the needle is proud.
    The needle can be set with a hex screwer from inside the tube located
    on the top of the cylinder. The needle is locked by a side screw.
    Don't forget to fill up the carbs with carb oil after setting

    Hope this helps some of you.
    Pierrot


    User Feedback

    Recommended Comments

    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...