Jump to content
Touring Motor Gliders Association (TMGA)
  • Happy New Grob 109 Owner


    Ethan Graham

    Subject: Happy new Grob 109 owner
    From: "Ray" <jb92563@GgGu5eH7tDcVFb9cWINwFiqo9lvp6I1U-wjbbbX9KhnC1Evmnu93DAIeLMzbaJd_En4bW9L2Eio.yahoo.invalid>
    Date: 6/30/08 7:20 AM
    To: G109_Pilots@yahoogroups.com

    Well its official folks, I'm now the proud new owner of a Grob 109 N60BG formerly from Big Bear, CA, now based in Lake Elsinore, CA.

    Just in time to take advantage of its miserly fuel sipping during record high fuel prices.

    I had a hard time getting any work done as I had a steady stream of interested parties wanting to check it out and oogle at the new cool looking bird at the field.

    I was the envy of GA aviation types as they related their $200 fuel bills and the glider guys as they knew no wave or remote soaring site was beyond my reach now.

    I also have a list as long as my arm of people eager to hop in for a ride.

    I'm looking forward to all the fun that lays ahead.

    Ray



    Subject: Re: [G109_Pilots] Happy new Grob 109 owner
    From: lyonbyte
    Date: 6/30/08 12:46 PM
    To: G109_Pilots@yahoogroups.com

    Congrats! We loves ours in Hawaii were the gas prices are thru the roof and we can glide on any of the Islands as opposed to being stuck on the North Shore of Oahu.



    Subject: [G109_Pilots] Re: Happy new Grob 109 owner
    From: "Richard Depinay"<jeplane
    Date: 7/1/08 8:13 AM
    To: G109_Pilots@yahoogroups.com


    From: Ray 

    "I'm new to these intracacies of registration but since it has been passing annuals I assume its a legit combination. Ray"

    That's a real assumption indeed! Passing an annual could mean that the last owner got away with finding an inpector willing to sign the paperwork for some hard cash. May not be the case in this instance, but still, it happens everyday!

    Again, just because an aircraft passes an annual doesn't mean you shouldn't go deeper in the paperwork...

    Richard
    Phoenix, AZ



    Subject: Re: Happy new Grob 109 owner
    From: "mahkceb30062" <beckham
    Date: 6/30/08 9:14 PM
    To: G109_Pilots@yahoogroups.com

     

    Ray,

    Congratulations on the new bird but looking at the pictures, I just
    have to ask a few questions. What kind of prop do you have? It
    appears to be a fixed pitch & obviously not the Hoffmann called for
    in the TCDS. AFAIK there are no STC'd props for the G109 or G109B.
    FAA records indicate you have Standard Airworthiness Certificate, has
    it been changed to Experimental category or was it installed with a
    337? If it was done on a 337 I'd love to get a copy. Prices for a new
    (not a rebuild or recertification) Hoffman prop are pushing $8000.00
    now. Is it primarily climb or cruise. If it's a climb prop, what kind
    of cruise do you get. If it's cruise, what's you ROC. Thanks in
    advance for the info once Congrats.

    Bill



    Subject: Re: Happy new Grob 109 owner
    From: Ray
    Date: 7/1/08 7:39 AM
    To: G109_Pilots@yahoogroups.com

    The prop I have on the Grob is a Tennesee Prop wood 62x30.

    It gets to about 3000rpm in straight level flight and cruises at about 75kts with that prop.

    It climbs at about 400 fpm at 1000' but at 9500' its only about 300 fpm.

    It seems based on the rpms that it is 1/3rd way between the Hoffman climb/cruise pitch more on the climb side.

    It is the alternate till I get the Hoffman overhauled.

    This Grob was an Experimental at one point and now Certified but the engine is still listed as AMA/Expr so perhaps the engine/prop combo is experimental and the airframe is certified?

    I'm new to these intracacies of registration but since it has been passing annuals I assume its a legit combination.
    Perhaps there is a 337 in the documentation but it is registered as a glider and I dont think gliders have an engine and prop as required equipment so....?

    Ray



    Subject: Re: Happy new Grob 109 owner
    From: "mahkceb30062" <beckham@Jw0XRKVFfAYamce80nJUXwNSGSgUi089hfi8FkptCm76Hnt1iI8PnVpjsTrBFhchGjY5GydotvhCbDi6.yahoo.invalid>
    Date: 7/1/08 9:44 AM
    To: G109_Pilots@yahoogroups.com

    Ray,

    I'm not trying to rain on your parade & I'm certainly no expert in
    the matter but according the the TCDS, the Limbach engine & Hoffmann
    prop are required. There are no STC's listed for the G109 so that's
    the only option with a standard airworthiness certificate unless your
    prop was installed on field approval witha 337. I had the same
    question regarding the engine being shown Amateur/Experimental
    because I was considering the possibility of changing engines. The
    way the FSDO explained it to me was that although the Airframe is
    certificated the engine is not certificated in the US & is considered
    a "required appliance of the airframe" & no deviation is allowed.
    Since it is not a certificated engine they had to show it
    experimental. Perhaps the previous owner & particularly the IA who
    signed of the last anual can shed more light but it appears to me (&
    again I'm no expert or even A&P) that unless there is a 337 covering
    the prop change or your bird is experimental the combination may not
    be legal to fly.

    Bill



    Subject: Re: Happy new Grob 109 owner
    From: Ray
    Date: 7/2/08 7:15 AM
    To: G109_Pilots@yahoogroups.com

    Would the 337's show up in the FAA aircraft records?

    I ordered the full documentation from the FAA and need to go through it in detail again as there is quite a stack of info about it.

    Looks like I might have to fill out my own 337 for the prop if its not on file with the FAA.

    You said that the engine is uncertified but a required appliance... does that mean that substitutions are possible? Perhaps an Aerovee equivalent which is essentially a similar engine in HP & Performance?

    Ray



    Subject: Re: Happy new Grob 109 owner
    From: "mahkceb30062" <beckham@o5zDbj3VoqNtOuuJcDDtk2CXC-0iN6ehaGON0m7VmuICvbYNbb8_dnqWz2eu_20UQpz3ULuqj37OeH1d.yahoo.invalid>
    Date: 7/2/08 9:34 AM
    To: G109_Pilots@yahoogroups.com

    Ray,

    I don't know if the 337's show up in the FAA but I do not believe that
    they do. It's very doubtful that you can get field approval on that
    prop. It reduces your cruise & ROC substantially & field approvals are
    hard to get now anyway, at least in my area. Engine substitution is not
    an option according to my FSDO. The TCDS
    (http://www.airweb.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.n
    sf/0/E1E3375D6186FE8E8525671D006F6C83?OpenDocument) requires the
    specific Limbach engine & prop combination, there can be no deviation
    without field approval or STC. The way I understand it (and again I'm
    no expert) the only way you could change the engine or prop would be by
    field approval on a 337 or by going Experimental which would still
    require inspection & approval.

    I think your best bet at this point is the AI who signed off the last
    annual. It's pretty much on his shoulders as to why it was approved. Is
    there any log book entry for the prop installation & if so, who signed
    it? All this is the reason a good pre-buy inspection is necessary. A
    good A&P would have surely caught this.

    Hope this helps but I know it's not the answer you wanted. Perhaps
    someone with more knowledge than I (I always rely on my IA) could chime
    in but my advice is to speak to an A&P/IA and/or your FSDO.



    Subject: Re: Happy new Grob 109 owner
    From: "williamberson" <whodunit@VSLD1vjKn7w8eiNVJTU3xsHa8T6ZZdmjntY2O6WwMFjHyNakwNxi9ztwOsQ-Rh-nI12MPyuJlL6vl0Ro.yahoo.invalid>
    Date: 7/2/08 1:09 PM
    To: G109_Pilots@yahoogroups.com

    The certification procedures for a powered glider are obviously looser than what would be
    required for an airplane. The single magneto is one example. The use of automotive parts
    and supplies is another example.
    The powered glider standards could require substantial research to fully understand. Some
    local FAA inspectors may not have the time for this research or may not agree with some of
    these standards that are contrary to airplane standards.

    The data plate on top of the engine gives the certification approval information.
    Bill


    User Feedback

    Recommended Comments

    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...