Jump to content
Touring Motor Gliders Association (TMGA)
  • Landings


    Ethan Graham

    Abstract:    No one has ever left one 'up there' - we all land - one way or another - but a few days ago I did four takeoffs and landings, (I had not flown for a while) and my hangar mate, Bob Gurr, took a series of pictures of my comings and goings. I've posted a file of a 'montage' I made of his pictures for anyone's amusement.


    Subject: Landings

    From: "Richard A. Davidson" <raydavids@yahoo.com>
    Date: 3/1/08 7:33 PM
    To:Taifun17E@yahoogroups.com

    No one has ever left one 'up there' - we all land - one way or another - but a few days ago I did four takeoffs and landings, (I had
    not flown for a while) and my hangar mate, Bob Gurr, took a series of pictures of my comings and goings. I've posted a file of a 'montage' I made of his pictures for anyone's amusement.
    Ray Davids


    Subject: Landings
    From: "Richard A. Davidson" <raydavids@yahoo.com>
    Date: 5/22/08 1:39 PM
    To: Taifun17E@yahoogroups.com

    On my first flight after buying my Taifun 17E in Pasco, WA I landed at Klamath Falls, OR on my way home and, as I had always done in my Cardinal RG before, carried a little power on final. Even with 15-degree flaps I floated down the runway pulling full spoilers - and the 'beast' would not come down. Luckily KLMT was an Eagle F15 Air National Guard base so the runway was 10,302ft of which I used about 90%. So, I have learned to make sure on final that my Taifun is at engine idle, spoilers out, when landing and now I frequently use 30- degree flaps . One must remember that this vehicle is primarily a glider and really doesn't want to come down. Switching hands for a go-around is mandatory, but first lock spoilers with left hand which then moves to stick, throttle with right hand and then flaps up.
    Dick Davidson (aka Ray Davids)


    User Feedback

    Recommended Comments

    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...