HiFlite Posted September 24, 2020 Report Posted September 24, 2020 Does anyone know who makes our brake parts, wheels and master cylinders? Or from where to get replacement parts? Quote
faselh Posted February 9, 2021 Report Posted February 9, 2021 were you able to find brake parts? I need to replace hydraulic brake lines = so need the tubing and fittings. Any idea where to get these? Thanks Hermann Quote
HiFlite Posted April 11, 2021 Author Report Posted April 11, 2021 Sorry, I haven't logged in for a while. AFAIK, all of these fittings are standard AN and the rest are Cleveland or copies of Cleveland. Quote
Robert Devine Posted June 30, 2022 Report Posted June 30, 2022 Having problems with brake system on ximango looking for expert help. Quote
HiFlite Posted June 30, 2022 Author Report Posted June 30, 2022 13 hours ago, Robert Devine said: Having problems with brake system on ximango looking for expert help. I'm no expert, but if you could describe the problem in detail, perhaps I or others can help. Quote
Thermalseeker Posted July 3, 2022 Report Posted July 3, 2022 I don't know about the earlier versions, but the AMT-200s "Super Ximango" has bone stock Cleveland rotors and calipers. The pads are RA6. Nothing out of the ordinary at all. The rest of the componentry, i.e., fluid reservoir, lines, actuator cylinders, etc., is available from Aircraft Spruce. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.