Kmotexas Posted June 16, 2019 Report Share Posted June 16, 2019 Hi , Just have some time on my hands ..."alway dangerous " Don't liked my paint peeling and holes drilled all over the place panel anymore. I spend a few Hrs with SolidWorks and designed a new one...... Klaus Quote Link to comment Share on other sites More sharing options...
Kmotexas Posted June 17, 2019 Author Report Share Posted June 17, 2019 Quote Link to comment Share on other sites More sharing options...
Andrew Posted June 20, 2019 Report Share Posted June 20, 2019 Looks great, any chance of sharing the Solidworks file Thanks Andrew Quote Link to comment Share on other sites More sharing options...
Kmotexas Posted June 20, 2019 Author Report Share Posted June 20, 2019 The File is still in REV status. When done I will post the design. klaus Quote Link to comment Share on other sites More sharing options...
Kmotexas Posted June 20, 2019 Author Report Share Posted June 20, 2019 The File is still in REV status. When done I will post the design. just found out you own a 109 too......... material is aviation approved carbon fiber. About $900 included cutting ( without markings ) markings silkscreen about $300 ipad support ( 3D printed $80 each ) All engine instruments UMA ( set about $3500) redesign to your spec $ 50 per instrument . SolidWorks2018 is required to redesign. Klaus klaus Quote Link to comment Share on other sites More sharing options...
Andrew Posted June 22, 2019 Report Share Posted June 22, 2019 Thanks in the process of generating the engineering to replace with a 100hp Rotax so will need to update the panel shortly. where did you get that nice ignition switch panel from Quote Link to comment Share on other sites More sharing options...
Norm Posted June 23, 2019 Report Share Posted June 23, 2019 Where did you find the models for the gauges? Quote Link to comment Share on other sites More sharing options...
Kmotexas Posted June 23, 2019 Author Report Share Posted June 23, 2019 Electro air EA-1300 / I modeled the instruments in SW and inserted a picture of the instrument . Quote Link to comment Share on other sites More sharing options...
Andrew Posted June 10, 2022 Report Share Posted June 10, 2022 Hi Klaus, Just been looking at the great job you have done with your 109. Any chance I can grab a copy of the solidworks panel templet. I have VH-ZAK S/N 6085 in Australia Thanks Andrew Quote Link to comment Share on other sites More sharing options...
Kmotexas Posted June 11, 2022 Author Report Share Posted June 11, 2022 Hi Andrew, Yes, not a problem. However, the template is specific design for the instruments and components in use. When you cut this template as is you need to follow my BOM. Just let me know what do you like to accomplish. Klaus Quote Link to comment Share on other sites More sharing options...
xintersecty Posted June 17, 2022 Report Share Posted June 17, 2022 On 6/22/2019 at 5:58 AM, Andrew said: Thanks in the process of generating the engineering to replace with a 100hp Rotax so will need to update the panel shortly. where did you get that nice ignition switch panel from Did you do the upgrade to the rotax? Quote Link to comment Share on other sites More sharing options...
Kmotexas Posted June 17, 2022 Author Report Share Posted June 17, 2022 No Rotax - wend with 94mm nicks and extended oil pan ( VW Bus ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.