Ximango brake tubing - Sep 2004

Check the brake tubing under the panel with
a flashlight and maginifying glass to get the numbers off the tubing | I can not help you with the prop. protector material, because I have
owned several Hoffmann props. and mine have always been "naked".   I am
just real careful not to run up over loose stones, sand or gravel.

=============================

Date:         Tue, 28 Sep 2004 21:57:27 -0400
Reply-To:     Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
From:         Holliday Obrecht III <H2O3Flyboy@WEBTV.NET>
Subject:      Re: Ximango brake tubing
In-Reply-To:  john adbon <adbinoutdoor@YAHOO.COM>'s message of Sun, 26 Sep 2004
              15:54:57 -0700
Content-Disposition: Inline
Content-Type: Text/Plain; Charset=US-ASCII
Content-Transfer-Encoding: 7Bit
MIME-Version: 1.0 (WebTV)

John,

I can not help you with the prop. protector material, because I have
owned several Hoffmann props. and mine have always been "naked".   I am
just real careful not to run up over loose stones, sand or gravel.

Try Aircraft Spruce and Specialty  Co. at (877) 477-7823,  Page 113 of
their catalog lists Nylo-Seal nylon tubing and Poly-Flo (metal) fittings
for hydraulic applications. Check the brake tubing under the panel with
a flashlight and maginifying glass to get the numbers off the tubing.  I
would guess you need 22-NSR which is 1/8"  OD or 33-NSR which is 3/16 "
OD.  Runs $0.15 - 0.16 per foot.

Good luck,
Holliday Obrecht