Ximango Gap Seals - Sep 2004

Hello
I have a few small leakes form the 4mm plastic brake line andwondering if anyone has an idea where I can purchase more of this brake lineand about 3 or 4 olive fittings?
john thirwal  I have tried several local brake co and noone has this size of brakek line.

=====================

Date:         Thu, 23 Sep 2004 16:51:22 -0600
Reply-To:     Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
From:         Jim Durango <jim.durango@JIMTEC.NET>
Subject:      Re: Ximango gap seals
Comments: To: Holliday Obrecht III <H2O3Flyboy@webtv.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Holliday and Rob,

The gap seals are 35mm wide.

Cheers  Jim McCann
=========================================================================
Date:         Thu, 23 Sep 2004 22:03:16 EDT
Reply-To:     Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
From:         XimangoUSA@AOL.COM
Subject:      Re: Ximango gap seals
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Thanks to Jim for settling that!!!!  (The plane we have here is not equipped
that way.)

Chuck
=========================================================================
Date:         Sun, 26 Sep 2004 06:41:23 -0700
Reply-To:     Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
From:         john adbon <adbinoutdoor@YAHOO.COM>
Subject:      Re: Ximango gap seals
In-Reply-To:  <74.425cee94.2e84da64@aol.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Hello
I have a few small leakes form the 4mm plastic brake line andwondering if anyone has an idea where I can purchase more of this brake lineand about 3 or 4 olive fittings?
john thirwal  I have tried several local brake co and noone has this size of brakek line.

XimangoUSA@AOL.COM wrote:
Thanks to Jim for settling that!!!! (The plane we have here is not equipped
that way.)

Chuck


---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!
=========================================================================
Date:         Sun, 26 Sep 2004 15:54:57 -0700
Reply-To:     Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       Ximango Owners Group <XIMANGO@HOME.EASE.LSOFT.COM>
From:         john adbon <adbinoutdoor@YAHOO.COM>
Subject:      Re: Ximango gap seals
In-Reply-To:  <74.425cee94.2e84da64@aol.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Hello,

Materials ?I have a few small leaks form the 4mm brake hydraulic plastic tube and cannot find any of this material locally.

Would anyone know where this pink 4mm tube can be purchased together with new plastic of brass 'olive ' fittings?

What is your view in regard to the neoprene Prop protector tape? Should the blades be re balanced after fitting this tape as it might be difficult to get it to wilthin a few grams and is there a tecknique for fitting the tape to the radius section near the tip? It is hard to eliminate the wrinkles around the tip.

What is the recommended service life for the engine Mounts on the 912 I find I do get a litte vibration on the idle setting gust before switching the engine off in thermals.

Noticed someone has bee calling for mylar aileron gap seals and wondeing if this makes much difference?

regards john thirwall