Ximango Parts - Mar 2008

I received one of your initial kits with parts to comply with the AD for the castellated nuts and safety's.  I believe you said you would bill us, and as yet, I've not seen a bill, but am looking for it soon.

==========================

Date:         Sun, 2 Mar 2008 21:20:18 -0800
Reply-To:     "Ximango Owners Group (XOG)" <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       "Ximango Owners Group (XOG)" <XIMANGO@HOME.EASE.LSOFT.COM>
From:         Rob Morgan <ls-484@SBCGLOBAL.NET>
Subject:      Ximango Parts
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hi Chuck,
  
  I received one of your initial kits with parts to comply with the AD for the castellated nuts and safety's.  I believe you said you would bill us, and as yet, I've not seen a bill, but am looking for it soon.
  
  I've started to install some of the kit, but still have a bit more to do to have all the parts installed.  As the annual was being completed, I came up with some things I need to get.
  
  First, I'm looking for a CAMLOC 4002 stud for the lower cowling.  Do you happen to know what dash number is used for the Ximango (mine is s/n 123)?  Aircraft Spruce has these studs (-2 thru -9), but I'm uncertain which dash number to get.
  
  Second, I'm looking for a new rubber shock grommet for the full swivel tailwheel. I found mine to be split.  (Not sure if I can find this at aircraft spruce.)  Is this a special item I need to get from you?  If so, do you have one you can drop in the mail?
  
  Tnx for your help,
  
  Rob
=========================================================================
Date:         Mon, 3 Mar 2008 09:41:54 EST
Reply-To:     "Ximango Owners Group (XOG)" <XIMANGO@HOME.EASE.LSOFT.COM>
Sender:       "Ximango Owners Group (XOG)" <XIMANGO@HOME.EASE.LSOFT.COM>
From:         John Lawton <Thrmlseekr@AOL.COM>
Subject:      Re: Ximango Parts
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

In a message dated 3/3/2008 12:20:26 AM Eastern Standard Time, 
ls-484@SBCGLOBAL.NET writes:


First, I'm looking for a CAMLOC 4002 stud  for the lower cowling.  Do you
happen to know what dash number is used  for the Ximango (mine is s/n 123)? 
Aircraft Spruce has these studs (-2  thru -9), but I'm uncertain which dash number
to get.
 
Hey Rob,

Look closely at the other studs and you'll see the dash number. I just 
replaced two on my upper cowl that were too short and were causing the cowl to 
bend in to much. I just ordered the next size above what was stamped on the 
existing studs.
 
Hope it helps!

Regards,
 
John  Lawton
Whitwell, TN (TN89)
Ximango #135